Having trouble getting Windows OS to start up in the Safe Mode? Like previous versions of windows, Windows 8, 8.1, 10, and 11 can not be booted directly into safe mode. Rather, you have to access safe mode in Advanced Startup Options.
There are a few ways to get your computer to start up in “Safe mode“. So in this article, I will tell you some easy steps, to boot into safe mode in windows OS. Whether your windows versions are windows 8, 8.1, 10, or 11, You can use any of these options, listed below, to boot into safe mode. So let’s get started.
How to Boot into Safe Mode in Windows
We use safe mode for many reasons. The main reason behind, using this mode is, that when the user is having trouble with a Windows Operating System, the Safe mode is used to fix the problem.
This is a way in the Windows operating system to load your operating system without loading all the drivers or programs that are needed for your PC to work properly. Here are some of the ways to start your Windows 8 computer in safe mode:
Method 1 – Use Windows Recovery Options
So, this is not the easiest one, but rather consider a good way to boot into safe mode in windows OS. This option required you to log into windows in order to enable safe mode. So, if you are having an issue, or you cannot log in to windows. Then you can consider going with the other method listed below. This option worked on windows 8, 8.1, 10, and even windows 11 also. Just follow the instructions:
- Open your PC’s Settings and click on Update and recovery, which is the last option on the left.
- Then, on the Update and Recovery screen, go to the Recovery section.
- Now you will see 3 options. Click on Restart now in the Advanced startup option.
- Your computer will restart and show a screen that says “Choose an option” Wher you have to Click on the option that says Troubleshoot.
- Then click on the Advanced button, and then click on the Startup setting button.
- To boot into safe mode, click the Restart button on the screen and then Press 4 or F4 on your keyboard.
Method 2 – Restart Your PC Multiple Times
To run your PC in safe mode, all you have to do is restart it or force shut it down over and over until it goes into troubleshooting mode. When Windows fails to boot three times in a row, it will automatically start the Automatic Repair mode on your PC while it boots up. Just do this to get into safe mode.
- Press the power button to turn on pc, but when the windows logo appears hold down the power button for 2 to 4 seconds until the computer shut down completely.
- Repeatedly restart or shut down your PC or laptop until the Automatic Repair screen appears.
- On the Automatic Repair screen, click on the Advanced button.
- Click the Troubleshoot button on the next screen.
- Click on Advanced Options, then click on Startup Setting.
- Then click the option that says “Restart“. To get into safe mode, press the 4 or F4 key on your keyboard once you see the Startup Setting Screen.
If this method doesn’t work on your computer, try one of the other methods below.
Method 3 – Using the System Configuration Tool
This is the easiest way to do it. Using a tool like “msconfig.exe“, which is part of the System Configuration tool, is an easy way to get to Safe Mode. Use the system configuration tool to follow the steps to turn on safe mode.
- Sign in to your Windows computer, type “
msconfig” into the search bar, and then click on the result that has “msconfig” in it.
- When the System Configuration screen comes up, go to the Boot tab and in the Boot option, check the box that says “Safe boot” if it isn’t already checked.
- Then, on the System Configuration screen, click Apply and then click OK.
- Now, Windows will show you a pop-up message that says, “You need to restart your PC to apply these changes“. You can click or tap the Restart button to restart now, or you can choose the Restart Later button to restart later.
After the restart, your PC will run in safe mode.
Method 4 – Shift + Restart on the windows login screen
This is a shortcut method, instead of restarting, again and again, going into the pc settings, you can do a simple trick that works almost all the time. Just press a special key, before the windows logo appears. You can use this method even without login into your user account. Follow the instructions to get into safe mode.
- On the screen where you sign in to your PC, hold down the SHIFT key and click the Power button at the same time.
- Then press the Restart button.
- Your screen will show you a Troubleshoot menu.
- On the screen for troubleshooting, click on Advanced options, then click on Startup Setting.
- Windows will tell you that you need to restart your computer in order for it to change the boot option. Last, it will turn on Safe Mode and you can click or tap Restart.
- After your PC restarts, windows will show a lot of different settings for how it starts up.
- Choose Safe Mode or hit the 4 or F4 key.
- You can also choose Safe Mode with Networking or Safe Mode with Command Prompt by pressing the 5 or F5 key on your keyboard and the 6 or F6 key on your keyboard, respectively.
When you turn on Windows, it will start up in the Safe Mode environment you chose.
Method 5 – Use a Windows 8 installation media
If you have bootable media for Windows OS, like a DVD or USB memory stick, you can use it to start your PC or device in Safe Mode. Plug it into your computer or other device and start up from it. When the Windows installation wizard starts, choose the language and keyboard layout you want and press Next.
- On the next screen, in the bottom-left corner, click or tap the “Fix your computer” link.
- Click or tap Troubleshoot on the “Choose an option” screen.
- Press the Advanced options button on the Troubleshoot screen.
- Tap or click Startup Repair. Click on the Restart button.
- Your windows will restart. After the windows restart, you have a series of options to choose from.
- Press 4 or F4 to boot into safe mode.
The PC or device restarts and goes into Safe Mode on its own.
So that’s it. We have talked about 5 methods of going into the safe mode of windows os. All of the mentioned methods are best for enabling safe mode. And for creating bootable media drive, you can use these simple softwares, Rufus and WinfromUSB.